The PC5108 modules can be used to add up to 8 addtional hardwire zones to the PC5010 control panel. Current draw is 35 mA. Connects to the alarm panel via the 4 wire COMM bus, which is the same wire that the Keypads and other devices are connected to. This means that these devices do not need to be in the same box as the alarm panel. This is a distributed system. It has a tamper option to connect a tamper switch to the unit if it is installed in a remote box. VAUX is used to provide power to secondary devices. Not to exceed 100 mA. Each Zone has a common and a zone, therefore no bunching of wires at the terminal block. The board is about 1.5" x 3" in sizePricing:
1-6 7+
$C 53.76 51.61
$US 53.76 51.61
EURO 38.17 36.64
